I've been looking recently to buy a hot plate for SMD work. I didn't like the big 20 by 20 cm ones since I will not be doing such big PCBs. I also didn't like the Miniware 3 by 3 cm hot plate, because this is too small for my needs (and rather expensive). I decided to buy a 10 by 10 cm heating table, and Mechanic ET-10 caught my eye. More specifically I liked the hot plate itself, which is a 10 x 10 x 1.2 cm thick block of aluminum. It has two holes drilled through the back where two heating elements are inserted.
I eventually bought it and from the outside it seems a solid design. However, just as I turned it on and set its temperature, I heard a relay clicking inside. Well, using a relay for an "Intelligent Digital Constant Temperature" is something that does not look very good. The aluminum heating block has an important volume, therefore a high heat inertia. The best way to get it to a constant temperature is to use PID (proportional-integral-derivative) controller. And I don't think this is how its controller works.
 |
| Mechanic ET-10 hot plate |
